Introduction

How to disassemble the charger unit.

Slide the plug to release from the transformer unit
  • Slide the plug to release from the transformer unit

Add Comment

Slip a knife blade into the seam on one of the long edges. It should go in a fair way. Lever the lid upwards. It requires quite a bit of force to release. Be careful as the outer casing is flimsy and it will be deformed.
  • Slip a knife blade into the seam on one of the long edges. It should go in a fair way. Lever the lid upwards. It requires quite a bit of force to release. Be careful as the outer casing is flimsy and it will be deformed.

Add Comment

Once the lid comes off you can slide out the internals.
  • Once the lid comes off you can slide out the internals.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

ehfb

Member since: 02/17/2015

61 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 15

All Time: 3,237