Introduction

This guide will show you how to disassemble the rear panel for a Asus MeMO Pad 7. This is the very first part to start to access all the parts on your tablet. You can remove the rear panel to check the parts and do the replacement guides of the tablet.

Parts

No parts required.

Make sure your device is turned off. Then with a plastic opening tool, carefully remove the back panel by carefully working your way around the perimeter. The panel will be glued on and requires pressure to open.
  • Make sure your device is turned off. Then with a plastic opening tool, carefully remove the back panel by carefully working your way around the perimeter.

  • The panel will be glued on and requires pressure to open.

Add Comment

After removing the rear panel, use a plastic openning tool to remove the frame of the tablet. Start in the middle of the top side and insert a plastic opening tool between the screen and the frame. Carefully run the plastic opening tool along all the edges of the tablet.
  • After removing the rear panel, use a plastic openning tool to remove the frame of the tablet.

  • Start in the middle of the top side and insert a plastic opening tool between the screen and the frame.

  • Carefully run the plastic opening tool along all the edges of the tablet.

Add Comment

When you take the rear panel and the frame out, place the rear panel and the frame away from the device.
  • When you take the rear panel and the frame out, place the rear panel and the frame away from the device.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 other people completed this guide.

Efe Guldogan

Member since: 08/26/2015

711 Reputation

5 Guides authored

Team

USF Tampa, Team 14-23, Meier Fall 2015 Member of USF Tampa, Team 14-23, Meier Fall 2015

USFT-MEIER-F15S14G23

4 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 11

Past 7 Days: 68

Past 30 Days: 377

All Time: 5,261