What you need
-
-
Make sure the laptop is powered off before starting. Remove the battery.
-
Use a plastic opening tool to pry out the narrow plastic lid.
-
Exercise caution when re-assembling: carefully and gently snap the lid back on. The plastic lid may easily break since it is made of a thin and soft plastic material.
-
-
-
-
Lift the keyboard away from the laptop, starting from the top end which is nearest to the screen.
-
-
-
Use the tip or the flat end of a nylon spudger to unlock the connector securing the flat cable of the keyboard to the logic board.
-
Pull the flat cable out not up.
-
When re-assembling, insert and hold the flat cable in place with one hand; use the other hand to lock the connecter using the tip or flat end of a nylon spudger. If you release the flat cable before locking the connector, it will most probably slip out.
-