Disassembling ZTE Racer II Phone - iFixit Repair Guide

What you need

Step 1 Phone

Disassembling ZTE Racer II Phone, Phone: step 1, image 1 of 1

Carefully prise the back cover off the phone.

Step 2

Disassembling ZTE Racer II Phone: step 2, image 1 of 1

Remove Battery, SIM Card, and MicroSD
Remove the four screws located around the edge of the case. They should be very small phillips heads.

Step 3

Disassembling ZTE Racer II Phone: step 3, image 1 of 1

Using a flathead screwdriver, carefully prise the black plastic away. It's held in with a series of clips, and should come away easily.

Step 4

Disassembling ZTE Racer II Phone: step 4, image 1 of 1

Carefully remove the ribbon cable that connects the capacitive screen to the main board. You need to carefully lift the small tab, then pull the cable out.

Step 5

Disassembling ZTE Racer II Phone: step 5, image 1 of 2

Disassembling ZTE Racer II Phone: step 5, image 2 of 2

Now using the flathead screwdriver, prise the plastic that makes up the front, away from the circuit board. Like the back piece, it has a series of clips around the edge, and should lift free without much effort.

Step 6

Disassembling ZTE Racer II Phone: step 6, image 1 of 2

Disassembling ZTE Racer II Phone: step 6, image 2 of 2

There you have it. Amazingly simple to take apart this phone.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Author

with 2 other contributors

Jacob

Member since: 04/27/13

121 Reputation

1 Guide authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 1,836