Disabling DualShock 4's Blue LED

Step 1 Disabling DualShock 4's Blue LED

• Remove the four Phillips #00 screws from the back of the controller.
Step 2

• Remove the bottom half of the controller while monitoring the triggers and springs within.
Step 3
• Pull the ribbon cable out of the LED/USB connecter assembly in the center of the controller.
Step 4
• Place a thin piece of paper in front of the last 2 pins (counting from left to right).
• The paper will prevent the motherboard from completing the circuit that enables the blue LED.
Step 5
• Don't twist the ribbon cable when inserting it.
Step 6
• Insert back ribbon cable with piece of thin paper already inserted.
Step 7
• Connect the bottom half of the DualShock 4 controller together.
• Rescrew 4 Phillips screws on the back of the controller.

Author

with 8 other contributors

Darie H

Member since: 11/20/12

4,550 Reputation

5 Guides authored

Badges: 16

• 
• 
• 

+13 more badges

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview