Asus Eee PC 1015PN motherboard dismantling (English)

Step 1 Motherboard



• To remove the battery, unlock the marked tabs.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2




• To remove the memory, lift the plastic tab covering the memory screw with a small slot head screwdriver.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• Lift the plastic cover and remove the SO-DIMM module.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4
• Remove the dummy SD-Card
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 5
• Unscrew 4 screws that are located in the battery compartment. Once removed, plastic tabs need to be removed on the upper part.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 6
• With an extraction tool, separate the keyboard chassis from the netbook, it has many tabs.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 7
• While separating the keyboard chassis, be careful with the keyboard connector. To remove it, simply slide the plastic retainer to be able to free it.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 8
• Unscrew the marked screws. One of those screws is behind a warranty sticker.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 9
• Disconnect the mouse connector. The connector has a white plastic tab that disconnects the connector.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 10
• With a flat screwdriver, release two plastic tabs ( 1 on each side), and with pressure in the front, release the chassis.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 11
• To disconnect the hard drive, two connectors need to be removed, pay attention to the connectors sides, the one on the left in marked as MB and the right is marked as IO.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 12
• Remove the screws, and slide the hard drive free.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 13
• Disconnect the motherboard connector and the IO plate.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 14
• Remove the fan connector, the BIOS battery and the upper connector.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 15
• Remove the plate screws and release the screen connector.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 16
• Remove the motherboard from the chassis, and disconnect a connector that is glued.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Special thanks to these translators:

es en

100%

DeZom

DeZom is helping us fix the world! Want to contribute?
Start translating ›

Author

with 3 other contributors

Jorge Casal Lopez

Member since: 05/09/13

313 Reputation

1 Guide authored

Badges: 6

• 
• 
• 

+3 more badges

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview