Introduction
This guide will allow you to replace the keyboard completely. You may need to remove this in order to replace the screen.
What you need
-
-
Pry up the top of the cover first by using a spudger to wedge in between the cover and base of the computer.
-
Once the spudger is between the cover and the base of the computer, wedge underneath the remaining border surrounding the keyboard.
-
-
-
-
Unhook the cables connected to the mouse pad by flipping up the black tabs that hold either cable in place.
No need to unhook. One can easily access the drive with this cable still attached.
Is it possible to put in an ssd?
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Please add a picture of the location of the two latches.
Doss Rainey - Reply
Please add a picture of the location of the latches.
Doss Rainey - Reply