Fix Your Stuff Community Store

Dell XPS 14Z L412Z Back Panel Replacement

Introduction

To open up the Dell XPS 14Z L412Z, one will need to first remove the back panel. This is a relatively simple and safe procedure. One place where care is necessary is around the I/O ports. The back panel provides the initial shell for these ports. Be careful not to damage these ports while pulling the panel. You will need one tweezers, a Phillips #0 screwdriver, and a plastic opening tool.

What you need

  1. Dell XPS 14Z L412Z Back Panel Replacement, Back Panel: step 1, image 1 of 1

    • Remove the back cover of the laptop by unscrewing eight 3.5mm screws using a Phillips #0 screwdriver.

    Edit

  3. Dell XPS 14Z L412Z Back Panel Replacement: step 2, image 1 of 2 Dell XPS 14Z L412Z Back Panel Replacement: step 2, image 2 of 2

    • Using the plastic opening tool, pry up the back cover.

    • It is recommended to start from a corner and run the tool along the edge of the cover.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 1 other contributor

Ryan Vanden Boomen

Member since: 02/15/18

188 Reputation

1 Guide authored

Badges: 9

+6 more badges

Team

UW Stout, Team S8-G3, Ogden Spring 2018 Member of UW Stout, Team S8-G3, Ogden Spring 2018

UWSTOUT-OGDEN-S18S8G3

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 427