Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

WIFI not working or slow? Replace it (only screwdrivers required).

  1. Remove ten 3mm screws from the back cover with a T4 screwdriver. Remove ten 3mm screws from the back cover with a T4 screwdriver.
    • Remove ten 3mm screws from the back cover with a T4 screwdriver.

  2. Remove the black tape covering the RAM and wireless card with your hands. Remove the black tape covering the RAM and wireless card with your hands.
    • Remove the black tape covering the RAM and wireless card with your hands.

  3. Use a plastic iFixit opening tool to remove the two wires connected to the wireless card. Use a plastic iFixit opening tool to remove the two wires connected to the wireless card.
    • Use a plastic iFixit opening tool to remove the two wires connected to the wireless card.

  4. Use a PH00 screwdriver to remove the one 3mm screw that holds the wireless card in place. Use a PH00 screwdriver to remove the one 3mm screw that holds the wireless card in place.
    • Use a PH00 screwdriver to remove the one 3mm screw that holds the wireless card in place.

  5. Use your hand to remove the wireless card. Use your hand to remove the wireless card. Use your hand to remove the wireless card.
    • Use your hand to remove the wireless card.

Molly Skinner

Member since: 02/15/2017

254 Reputation

2 Guides authored

Team

USF Tampa, Team S6-G3, Lacy Spring 2017 Member of USF Tampa, Team S6-G3, Lacy Spring 2017

USFT-LACY-S17S6G3

4 Members

5 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 11

All Time: 483