Introduction

if your laptop is overheating and you need to replace it. here are the steps that you should follow.

  1. Remove ten 3mm screws from the back cover with a T4 screwdriver. Remove ten 3mm screws from the back cover with a T4 screwdriver.
    • Remove ten 3mm screws from the back cover with a T4 screwdriver.

  2. Remove the ribbons from both sides with a plastic iFixit opening tool.
    • Remove the ribbons from both sides with a plastic iFixit opening tool.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Use a PH1 screwdriver to remove the two 3mm screws that secure the fan.
    • Use a PH1 screwdriver to remove the two 3mm screws that secure the fan.

  5. Use a plastic iFixit opening tool to remove the wire connected to the fan. Lift the fan up to remove.
    • Use a plastic iFixit opening tool to remove the wire connected to the fan.

    • Lift the fan up to remove.

Finish Line

Ahmad EL Herbawi

Member since: 03/01/2017

433 Reputation

3 Guides authored

Team

USF Tampa, Team S6-G3, Lacy Spring 2017 Member of USF Tampa, Team S6-G3, Lacy Spring 2017

USFT-LACY-S17S6G3

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 12

All Time: 617