Skip to main content

Dell Vostro A90 Solid-State Drive Removal

What you need

  1. Dell Vostro A90 Solid-State Drive Removal, Removing the Battery: step 1, image 1 of 1
    • Turn the computer over.

    • Slide the battery-bay release latch and the battery-lock latch towards the outer edges.

    • Slide the battery out of the battery bay.

    • Turn the computer top-side up, open the display, and press the power button to ground the system board.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  2. Dell Vostro A90 Solid-State Drive Removal, Remove the Screws: step 2, image 1 of 1
    • Remove the two screws on the module cover.

  3. Dell Vostro A90 Solid-State Drive Removal, Lifting the Cover: step 3, image 1 of 1
    • Lift the cover off the computer at an angle as shown in the figure.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  4. Dell Vostro A90 Solid-State Drive Removal, Remove Solid-State Drive: step 4, image 1 of 1
    • Remove the two screws that secure the solid-state drive.

    • Lift the solid-state drive out of its system board connector.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Johnathan Hammond

Member since: 02/28/18

44,830 Reputation

408 Guides authored

Team

RampUP America, Inc. Member of RampUP America, Inc.

Community

42 Members

1,985 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 172