Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

In this guide, we will show you how to remove and replace the Memory Module.

Parts

No parts specified.

  1. Slide the release latches to unlock the battery.
    • Slide the release latches to unlock the battery.

  2. Slide the battery and remove it from the computer.
    • Slide the battery and remove it from the computer.

  3. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  4. Remove the three 7mm Phillips #0 screws that secure the access panel to the base of the computer.
    • Remove the three 7mm Phillips #0 screws that secure the access panel to the base of the computer.

  5. Lift the access panel up at an angle and remove it from the computer.
    • Lift the access panel up at an angle and remove it from the computer.

  6. Pry the retention clips away from the memory module until it pops up.
    • Pry the retention clips away from the memory module until it pops up.

  7. Remove the memory module from its connector on the system board.
    • Remove the memory module from its connector on the system board.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

Johnathan Hammond

Member since: 02/28/2018

36,995 Reputation

408 Guides authored

Team

Informative Technologies Inc. Member of Informative Technologies Inc.

Community

21 Members

1,816 Guides authored

View Statistics:

Past 24 Hours: 2

Past 7 Days: 3

Past 30 Days: 7

All Time: 144