Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

In this guide, we will show you how to remove and replace the Optical Drive.

Parts

No parts specified.

  1. Slide the left and the right battery release latches to the unlock position.
    • Slide the left and the right battery release latches to the unlock position.

  2. Slide the battery and remove it from the computer.
    • Slide the battery and remove it from the computer.

  3. Loosen the screw that secures the memory door.
    • Loosen the screw that secures the memory door.

  4. OPEN ALL THE TABS

    RAM Upgrade Kits for Mac

    Shop Kits

    Enough RAM
    For All The Tabs

    Shop Kits
  5. Pry up the memory door near the screw hole, lift and remove it.
    • Pry up the memory door near the screw hole, lift and remove it.

    • If this is all you are doing Follow Step In Reverse if not Go to Next Step.

  6. Remove the screw that secures the optical drive to the computer.
    • Remove the screw that secures the optical drive to the computer.

  7. Gently pry the optical drive out of the computer.
    • Gently pry the optical drive out of the computer.

  8. Remove the screws that secure the optical drive bracket.
    • Remove the screws that secure the optical drive bracket.

  9. Remove the optical drive bracket from the optical drive module.
    • Remove the optical drive bracket from the optical drive module.

Finish Line

One other person completed this guide.

Johnathan Hammond

Member since: 02/28/2018

37,298 Reputation

408 Guides authored

Team

Informative Technologies Inc. Member of Informative Technologies Inc.

Community

21 Members

1,816 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 82