Introduction

Prerequisite Only

Parts

No parts required.

Remove the power supply that connects the lower fan to the motherboard, distinguished by it's black, red, green and yellow wires. Make sure to press on the release tab while removing the power connector.
  • Remove the power supply that connects the lower fan to the motherboard, distinguished by it's black, red, green and yellow wires.

  • Make sure to press on the release tab while removing the power connector.

New Battery = Faster iPhone
Fix Kits starting at $16.99
Remove the rubber grommets from the base of the fan. A spudger may be useful. Remove the rubber grommets from the base of the fan. A spudger may be useful.
  • Remove the rubber grommets from the base of the fan. A spudger may be useful.

Press on the blue release tab and remove the fan. Press on the blue release tab and remove the fan.
  • Press on the blue release tab and remove the fan.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Wyatt

Member since: 10/06/2010

742 Reputation

6 Guides authored

Team

Cal Poly, Team 22-4, Maness Fall 2010 Member of Cal Poly, Team 22-4, Maness Fall 2010

CPSU-MANESS-F10S22G4

4 Members

13 Guides authored

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,913