1. Lay the Dell Optiplex GX260 down on a clean flat surface with the rear towards you.
    • Lay the Dell Optiplex GX260 down on a clean flat surface with the rear towards you.

    • Push the oval shaped buttons located on the top and bottom of the PC simultaneously and lift the case straight up.

    • Note: Some force may be required to push in the oval buttons open the PC case.

    cool de faires des sites comme ca :)

    baptiste Prando - Reply

  2. Identify the Hard Drive in the case.
    • Identify the Hard Drive in the case.

    • If there is more than one hard drive installed the process is the same for each hard drive.

    • Remove the power cable from the hard drive by squeezing the side tabs in and pulling gently.

    • Remove the IDE cable from the hard drive by gently pulling the ribbon cable out.

    cimer mec :)

    baptiste prando - Reply

    • Pinch the two green tabs inwards to release the hard drive and lift it out.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 other people completed this guide.

Kevin Schapansky

Member since: 10/05/2010

1,166 Reputation

9 Guides authored

Team

Cal Poly, Team 4-48, Amido Fall 2010 Member of Cal Poly, Team 4-48, Amido Fall 2010

CPSU-AMIDO-F10S4G48

4 Members

18 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 17

Past 30 Days: 45

All Time: 15,748