Dell OptiPlex FX170 RAM Replacement

You're viewing a previously published version of this guide. View latest version

Jun 16, 2015 - 11:48:19

Jun 16, 2015 - 11:48:19 Jun 16, 2015 - 11:48:17 Mar 13, 2015 - 06:20:04 Mar 13, 2015 - 06:13:25 Mar 13, 2015 - 06:02:32 Feb 26, 2015 - 04:33:49 Feb 26, 2015 - 04:20:56 Feb 26, 2015 - 02:09:39 Feb 24, 2015 - 04:45:41 Feb 19, 2015 - 05:02:28 Feb 19, 2015 - 05:01:52 Feb 19, 2015 - 04:45:28 Feb 19, 2015 - 04:44:46 Feb 19, 2015 - 04:44:06 Feb 17, 2015 - 05:44:31 Feb 17, 2015 - 05:30:14 Feb 17, 2015 - 05:29:35 Feb 17, 2015 - 05:29:35 Feb 17, 2015 - 05:28:49 Feb 17, 2015 - 05:28:49 Feb 17, 2015 - 05:26:16 Feb 17, 2015 - 05:24:37

Newer

Introduction

This guide was created for people who may need to replace the RAM for the Dell Optiplex FX 170. Someone may need to replace this component if it isn't working properly or has failed. This is an easy fix with no hazards. One should be familiar with electro-static discharge.

What you need

Step 1 Case

Dell OptiPlex FX170 RAM Replacement, Case: step 1, image 1 of 1

With the base stand facing upwards, unscrew the 6mm Phillips #2 screw.
Pull the base stand straight up from the device.

Step 2

Unscrew and remove the eight 4mm Phillips #0 screws (four on top, four on bottom) from the top and bottom of the device.

Step 3

Dell OptiPlex FX170 RAM Replacement: step 3, image 3 of 3

Run the flat side of the spudger along the entire line of the case starting from the back where the power plug and a small screw are located.
Use care to not apply excessive force that could damage retaining clips while running the spudger along the case.