Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer


No parts specified.

    • Before performing this task, make sure you turn off the computer and disconnect every external drive from it, whether it's a USB drive, power charger, or wireless adapter.

    • Remove battery and base cover from the computer.

  1. Disconnect the computer hard drive’s cable. [1]
    • Disconnect the computer hard drive’s cable. [1]

    • Loosen and remove the screws that lock the hard drive bracket. [2]

    • Take off the hard drive bracket; this will release the hard drive. [3]

  2. Remove the computer’s hard drive.
    • Remove the computer’s hard drive.

    • Put the new hard drive in the computer.

    • Put the hard-drive bracket on top of the hard drive.

    • Tighten the screws so that they can lock the computer’s hard drive.

    • Connect the hard-drive cable to the system board connector.

    • Install the battery and base cover.

Hezekiah Brown

Member since: 02/11/2021

6,012 Reputation

50 Guides authored


Informative Technologies Inc. Member of Informative Technologies Inc.


38 Members

1,959 Guides authored

View Statistics:

Past 24 Hours: 4

Past 7 Days: 13

Past 30 Days: 40

All Time: 484