Introduction
This is very simple compared to RAM removal on this laptop.
What you need
-
-
First, as always, power down the laptop and remove the battery., This can be done by pulling the two tabs above the battery and then simply pulling out the battery.
-
-
-
Now, remove the two drive screws, located in the bottom right of the laptop. These are helpfully labeled with a cylindrical hard drive icon.
-
-
-
-
Now, remove the drive from its cage by removing the single screw holding it in. See the picture for help
-
To reassemble your device, attach your drive to the bay and follow these instructions in reverse order.
To reassemble your device, attach your drive to the bay and follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
