Introduction

This guide will show how to add RAM or replace existing RAM on the Latitude D600

Parts

No parts required.

  1. Find the battery
    • Find the battery

    Add Comment

  2. Pull the tab to release the battery
    • Pull the tab to release the battery

    Add Comment

    • Pull the battery out

    Add Comment

    • Find the panel underneath the microsoft product key sticker, the panel is labeled with an M

    • Unscrew the single screw above the M

    Add Comment

    • Pull off the panel to reveal the RAM

    • RAM is held in by two tabs, pull each tab to the side and the RAM will pop up

    Add Comment

    • Once the RAM is popped up, slowly pull it out of the slot

    Add Comment

    • To add or replace RAM, place the memory into the slot at an angle

    • Make sure you line it up correctly

    • If it is in correctly it should stay up at an angle by itself

    • Then push down in the middle until it clicks into place

    Add Comment

    • The RAM should be secured by the tabs where the two semi circles are on the RAM

    • If it is not secure, just gently pull it out and try again, use the images to help you out

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 other people completed this guide.

Joseph

Member since: 07/16/2014

1,427 Reputation

6 Guides authored

One Comment

Almost perfect: easy; clear;

Herman - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 12

All Time: 1,988