Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

Not much prior knowledge is required before starting. According to Dell, however, you must have the following tools:

"‡#0 and #1 magnetized Phillips-head screwdrivers

‡ Small flat-blade screwdriver

‡ 5-mm socket wrench

‡ 7-mm socket wrench

‡ Small plastic scribe"

(Guide found at: http://tim.id.au/laptops/dell/latitude%2...)

  1. Flip laptop over. Flip laptop over.
    • Flip laptop over.

  2. Remove the screws over the RAM door Remove the screws over the RAM door
    • Remove the screws over the RAM door

  3. Open the RAM door. Open the RAM door.
    • Open the RAM door.

  4. Carefully pull the tabs over the RAM chip down - the RAM will spring up. Carefully pull the tabs over the RAM chip down - the RAM will spring up.
    • Carefully pull the tabs over the RAM chip down - the RAM will spring up.

  5. Remove the RAM from the socket and insert replacement RAM.
    • Remove the RAM from the socket and insert replacement RAM.

Axuak

Member since: 05/04/2011

331 Reputation

2 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 2,131