Fix Your Stuff Community Store

Dell Latitude 9510 USB and Headphone Jack Replacement

What you need

  1. Dell Latitude 9510 USB and Headphone Jack Replacement, Base Panel: step 1, image 1 of 1

    • Flip the device so that the base plate is facing you.

    • Use a Phillips #0 screwdriver to remove the nine 5.5 mm screws securing the base plate.

    Edit

  2. Dell Latitude 9510 USB and Headphone Jack Replacement: step 2, image 1 of 1

    • Wedge a spudger between the base plate and the chassis, then gently pry around the entire perimeter to release the base plate.

    • Remove the base plate.

    Edit

  3. Dell Latitude 9510 USB and Headphone Jack Replacement, Fan: step 3, image 1 of 1

    • Use a Phillips #0 screwdriver to remove the two 3 mm screws securing the fan.

    Edit

  4. Dell Latitude 9510 USB and Headphone Jack Replacement: step 4, image 1 of 1

    • Place your fingernails behind the plastic tabs on the speaker's motherboard connector, then pull directly backwards, toward the wires, until the connector releases from its port.

    • Lift the fan up and out.

    Edit

  5. Dell Latitude 9510 USB and Headphone Jack Replacement, Speakers: step 5, image 1 of 1

    • Use a Phillips #0 screwdriver to remove the four 2 mm screws from the speakers.

    Edit

  6. Dell Latitude 9510 USB and Headphone Jack Replacement: step 6, image 1 of 1

    • Use a spudger to gently lever the speaker connector out of its port.

    • Lift the speakers up and out.

    Edit

  7. Dell Latitude 9510 USB and Headphone Jack Replacement, USB and Headphone Jack Replacement: step 7, image 1 of 1

    • Use a Phillips #0 screwdriver to remove the four 3.5 mm screws.

    Edit

  8. Dell Latitude 9510 USB and Headphone Jack Replacement: step 8, image 1 of 1

    • Place your fingernails behind each of the plastic tabs on the plug, and pull directly backward until the connector releases.

    Edit

  9. Dell Latitude 9510 USB and Headphone Jack Replacement: step 9, image 1 of 1

    • Flip up the locking bars on the two ZIF connectors so they stand vertically, then gently remove the two ribbon cables connected to the IO daughterboard.

    • Lift the IO daughterboard up and out.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 5 other contributors

Matthew D

Member since: 02/08/22

97 Reputation

1 Guide authored

Badges: 2

Team

Western Carolina University, Team 1-5, Virtue Spring 2022 Member of Western Carolina University, Team 1-5, Virtue Spring 2022

WCU-VIRTUE-S22S1G5

4 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 8

All Time: 173