Introduction

This guide will show you how to remove the palm rest. This may be necessary in order to clean beneath the palm rest or to access the touchpad.

Parts

No parts required.

Image 1/1: Slide the release latches out toward the edges to unlock the battery.
  • To prevent injury and loss of data, ensure the device is turned off.

  • Slide the release latches out toward the edges to unlock the battery.

Add Comment

Image 1/1:
  • Remove the battery by pulling it up and out.

Add Comment

Image 1/1: Carefully remove the palm rest from the computer base  since it is still connected by a cable and to avoid damage to the palm rest.
  • Using a prying tool, gently pry the palm rest off of the palm rest bracket. Start prying from one side and slowly work your way around.

  • Carefully remove the palm rest from the computer base since it is still connected by a cable and to avoid damage to the palm rest.

Add Comment

Image 1/1: Lift the rest of the palm rest off the computer base.
  • Gently pull the touchpad cable off the palm rest bracket.

  • Lift the rest of the palm rest off the computer base.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Bariso Shuba

Member since: 10/26/2016

201 Reputation

3 Guides authored

Team

UW Tacoma, Team 1-4, Rose Fall 2016 Member of UW Tacoma, Team 1-4, Rose Fall 2016

UWT-ROSE-F16S1G4

4 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 39