Introduction
The hard drive removal process is simple and straight forward. Barely any disassembly is required.
Parts
No parts required.
-
Flip the laptop over, bottom-side up.
-
Push the switch next to the battery.
-
At the same time, lift the battery away from the laptop.
-
Remove the two 2.5mm Phillips #00 screws
-
Using your hand, pull hard drive out of the laptop.
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Team
USF Tampa, Team 11-1, Blackwell Fall 2014 Member of USF Tampa, Team 11-1, Blackwell Fall 2014
USFT-BLACKWELL-F14S11G1
5 Members
7 Guides authored
