Parts

No parts required.

Flip to the back side of the laptop
  • Flip to the back side of the laptop

Add Comment

Loosen one screw.
  • Loosen one screw.

  • This screw is attached to the panel and cannot be removed.

Add Comment

Spread out pins on the opposite sides. The chip will spring up at an angle. Place new chip in at a 30 degree angle. Push inward until pins can't be seen.
  • Spread out pins on the opposite sides. The chip will spring up at an angle.

  • Place new chip in at a 30 degree angle.

  • Push inward until pins can't be seen.

  • Push RAM down, so it lays flat.

  • Improperly replacing the RAM will cause it to short-circuit.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

May Chauvin

Member since: 04/14/2011

186 Reputation

6 Guides authored

Team

Cal Poly, Team 12-34, Maness Spring 2011 Member of Cal Poly, Team 12-34, Maness Spring 2011

CPSU-MANESS-S11S12G34

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 12

Past 30 Days: 24

All Time: 3,393