Introduction

You will learn how to remove the hard drive.

Parts

No parts required.

  1. With the lid closed, place the laptop upside-down on a flat surface.
    • With the lid closed, place the laptop upside-down on a flat surface.

    Add Comment

  2. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Remove the two 5.8mm screws securing the hard drive bay.
    • Remove the two 5.8mm screws securing the hard drive bay.

      • If the computer was right-side-up and rotated for use, the bay would be found in the rear left corner.

    Add Comment

    • Grasp the plastic bay handle and slide outwards to remove.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

May Chauvin

Member since: 04/14/2011

186 Reputation

6 Guides authored

Team

Cal Poly, Team 12-34, Maness Spring 2011 Member of Cal Poly, Team 12-34, Maness Spring 2011

CPSU-MANESS-S11S12G34

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 11

Past 7 Days: 40

Past 30 Days: 146

All Time: 14,444