Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

The hard drive is where all the data of the laptop is stored. Without it, or with a broken one, users' devices will not function at all. This guide will show the steps to replace the hard drive on this device.

Parts

No parts specified.

  1. Remove the two 6.5 mm PH1 Philips head screws on the back panel. Lift up the small panel from the top, using the plastic opening tools if necessary. Lift up the small panel from the top, using the plastic opening tools if necessary.
    • Remove the two 6.5 mm PH1 Philips head screws on the back panel.

    • Lift up the small panel from the top, using the plastic opening tools if necessary.

  2. Remove the two 5.5 mm PH1 Phillips head screws holding in the hard drive. Slide the hard drive out of its slot and lift it out of the device.
    • Remove the two 5.5 mm PH1 Phillips head screws holding in the hard drive.

    • Slide the hard drive out of its slot and lift it out of the device.

    • At the time of the creation of this guide, our device did not include a hard drive.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kevin Prairie

Member since: 03/20/2018

433 Reputation

4 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 5

All Time: 443