Skip to main content

Fix Your Stuff

Right to Repair

Store

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

In this guide, we will show you how to remove and replace the Battery Pack.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer)

    • CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty.

    • Shut down the computer and turn it over.

  2. Slide the battery latch to the unlock position. The battery pack pops up. Slide the battery latch to the unlock position. The battery pack pops up.
    • Slide the battery latch to the unlock position. The battery pack pops up.

  3. Lift and slide the battery pack away from the battery bay.
    • Lift and slide the battery pack away from the battery bay.

  4. Align the tabs on the NEW battery with the slots on the battery bay and snap the battery into place.
    • Align the tabs on the NEW battery with the slots on the battery bay and snap the battery into place.

Terrence15

Member since: 12/18/2017

72,973 Reputation

442 Guides authored

Team

Informative Technologies Inc. Member of Informative Technologies Inc.

Community

33 Members

1,967 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 114