Introduction

Whether it is faulty wiring or a speaker has blown, this guide will help you replace them.

  1. Remove the (10) P58F black screws on the back cover using the Phillips #0 screwdriver.
    • Remove the (10) P58F black screws on the back cover using the Phillips #0 screwdriver.

    • After removing the screws, remove the back cover using a plastic or metal spudger.

  2. Unscrew the (4) four screws surrounding the battery with a Phillips #0 screwdriver.
    • Unscrew the (4) four screws surrounding the battery with a Phillips #0 screwdriver.

    • Unplug the cord connected to the battery and remove the battery.

    • Gently pull out white ribbon.

    • Lift the black and red wires connected to the speaker and unplug them from the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Matthew Clements

Member since: 10/03/2017

510 Reputation

5 Guides authored

Team

USF Tampa, Team S5-G4, Walkup Fall 2017 Member of USF Tampa, Team S5-G4, Walkup Fall 2017

USFT-WALKUP-F17S5G4

4 Members

6 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 157