Parts

No parts required.

Introduction

This guide will show how to remove the brush leads on the DeWalt DW938.

Image 1/3: Use a torque bit screw driver to remove 6 T10 21.5 mm screws on the handle. Image 2/3: Insure power source is removed from tool. Image 3/3: Insure blade is removed from tool.
  • Use a torque bit screw driver to remove the T10 18.3 mm screw on the handle.

  • Use a torque bit screw driver to remove 6 T10 21.5 mm screws on the handle.

  • Insure power source is removed from tool.

  • Insure blade is removed from tool.

Add Comment

Image 1/1:
  • Carefully cut the safety sticker with a blade along the seam.

Add Comment

Image 1/1:
  • Remove the Clam Shell from the handle unit.

Add Comment

Image 1/1:
  • Lift the mechanical device off the pins of the clam shell.

Add Comment

Image 1/2: Image 2/2:
  • Remove the red and black trigger wires from the brush leads with the pliers.

Add Comment

Image 1/2: Image 2/2:
  • Remove the VSR trigger and the lock button.

Add Comment

Image 1/3: Repeat for the other brush. Image 2/3: Repeat for the other brush. Image 3/3: Repeat for the other brush.
  • Push in locking clips to remove the brush head.

  • Repeat for the other brush.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Christopher Chin

Member since: 03/08/2017

304 Reputation

3 Guides authored

Team

IUPUI, Team S4-G4, Baechle Spring 2017 Member of IUPUI, Team S4-G4, Baechle Spring 2017

IUPUI-BAECHLE-S17S4G4

4 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 12

All Time: 99