DeWalt DW936 Saw Blade Replacement - iFixit Repair Guide

You're viewing a previously published version of this guide. View latest version

Apr 10, 2017 - 03:43:29

Apr 10, 2017 - 03:43:29 Apr 10, 2017 - 03:43:19 Apr 10, 2017 - 03:41:00 Apr 10, 2017 - 03:40:33 Apr 10, 2017 - 03:07:56 Apr 10, 2017 - 03:07:54 Apr 10, 2017 - 03:07:15 Feb 28, 2017 - 05:50:35 Feb 28, 2017 - 05:49:17 Feb 28, 2017 - 05:46:57 Feb 28, 2017 - 05:44:31 Feb 28, 2017 - 05:42:38 Feb 28, 2017 - 05:39:37 Feb 28, 2017 - 05:39:00 Feb 28, 2017 - 05:37:28 Feb 28, 2017 - 05:27:13

Introduction

This guide will show you the necessary steps to replace the saw blade. The blade is not included in these pictures.

Step 1 Saw Blade

DeWalt DW936 Saw Blade Replacement, Saw Blade: step 1, image 1 of 1

Take out the Allen Key that is located on the front of the saw below the smooth control handle on the top of the saw.

Step 2

DeWalt DW936 Saw Blade Replacement: step 2, image 1 of 1

Use the Allen Key to replace to loosen the bolt where the center of the saw is/would be.

Step 3

DeWalt DW936 Saw Blade Replacement: step 3, image 1 of 1

Remove the circular nut that is used to hold the saw blade in place. It slide right off.

Step 4

DeWalt DW936 Saw Blade Replacement: step 4, image 1 of 1

Lift up the plastic cover on the bottom to expose the bottom slot on the saw.

Step 5

DeWalt DW936 Saw Blade Replacement: step 5, image 1 of 1

Place blade on the peg in the middle of the saw. The peg has two flat sides as does the saw hole to prevent slipping when spinning.

Author

with 1 other contributor

Scott Weinhardt

Member since: 01/25/17

603 Reputation

5 Guides authored

Team

Cal Poly, Team 8-2, Banghart Winter 2017 Member of Cal Poly, Team 8-2, Banghart Winter 2017

CPSU-BANGHART-W17S8G2

3 Members

5 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 25

All Time: 2,802