DeWalt DC970 Clutch Replacement

You're viewing a previously published version of this guide. View latest version

Introduction

If you are having trouble controlling the speed of the drill there may be a problem with your clutch. By following this guide you will learn how to replace it.

What you need

Step 1 Battery

DeWalt DC970 Clutch Replacement, Battery: step 1, image 1 of 1

Compress the buttons on either side of the battery and lift the drill away from battery.

Step 2

Remove battery from drill.

Step 3 Drill Assembly

DeWalt DC970 Clutch Replacement, Drill Assembly: step 3, image 1 of 2

DeWalt DC970 Clutch Replacement, Drill Assembly: step 3, image 2 of 2

Remove the eight 16 mm, Torx Security #15 screws.

Step 4

Lay the drill on its side and gently lift the top half off it.

Step 5 Clutch

DeWalt DC970 Clutch Replacement, Clutch: step 5, image 1 of 1

Lift drill mechanism from the drill assembly.

Step 6

Twist slightly and pull clutch away from motor.
Remove clutch.

Author

with 2 other contributors

Jonathan Hamel

Member since: 03/10/16

621 Reputation

4 Guides authored

Badges: 15

+12 more badges

Team

UMass Dartmouth, Team 4-2, Catania Spring 2016 Member of UMass Dartmouth, Team 4-2, Catania Spring 2016

UMASSD-CATANIA-S16S4G2

3 Members

13 Guides authored