Skip to main content

Parts

No parts specified.

  1. Locate the four 3/32" screws on the bottom of your device. Using  a JIS #00 screwdriver, remove the four 3/32" screws. After removing the screws, lift the cover off of the device.
    • Locate the four 3/32" screws on the bottom of your device.

    • Using a JIS #00 screwdriver, remove the four 3/32" screws.

    • After removing the screws, lift the cover off of the device.

  2. Using a JIS #1 screwdriver, remove the six 3/32" screws that attach the base-plate to the speaker enclosure. These screws are marked with red circles.
    • Using a JIS #1 screwdriver, remove the six 3/32" screws that attach the base-plate to the speaker enclosure. These screws are marked with red circles.

    • Using a JIS #000 screwdriver, remove the two 1/16" screws from the areas marked with an orange circle.

    • Having the magnetic pad handy will be beneficial, as these screws are very small and easily lost.

  3. Lift the base-plate off of the enclosure.
    • Lift the base-plate off of the enclosure.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 10

Past 30 Days: 29

All Time: 1,340