Skip to main content

Fix Your Stuff

Right to Repair

Store

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

The top cover of the RD-810 protects the internal components. It must be removed to conduct any repairs.

Tools

Parts

No parts specified.

  1. Make sure the projector is unplugged before starting Place the projector upside down to access the screws on the bottom.
    • Make sure the projector is unplugged before starting

    • Place the projector upside down to access the screws on the bottom.

    • Remove the five 7mm long screws using a #3 Phillips screwdriver at least 2 inches long.

  2. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Shop Now

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Shop Now
  3. Flip the projector over and then remove the cover by lifting it up.
    • Flip the projector over and then remove the cover by lifting it up.

John Russell

Member since: 02/14/2018

774 Reputation

9 Guides authored

Team

USF Tampa, Team S5-G3, Eyestone Spring 2018 Member of USF Tampa, Team S5-G3, Eyestone Spring 2018

USFT-EYESTONE-S18S5G3

3 Members

9 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 87