Parts

No parts required.

Introduction

This guide teaches the user how to replace the safety switch in your Cuisinart DLC-8F. The removal of the safety switch first requires the removal of the bottom hood and all of this can be done with just a Phillips #2 screwdriver. This is an easy process and should only take about 10 minutes.

Image 1/2: Image 2/2:
  • Remove the four 18 mm Phillips #2 screws from the bottom by prying up the rubber feet to access the screw hole.

Add Comment

Image 1/2: Image 2/2:
  • Gently lift the bottom cover from the main body.

Add Comment

Image 1/2: Image 2/2:
  • Remove the two 14 mm Phillips #2 screws holding in the safety switch bracket.

Add Comment

Image 1/2: Image 2/2:
  • Pull out the safety switch bracket with your hand.

Add Comment

Image 1/2: Image 2/2:
  • Remove the two 19 mm Phillips #2 screws holding the safety switch in the bracket.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Pull off the three wires on the safety switch with your hand by firmly grabbing the wires at the base.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

David Colman

Member since: 01/25/2017

438 Reputation

4 Guides authored

Team

Cal Poly, Team 8-6, Banghart Winter 2017 Member of Cal Poly, Team 8-6, Banghart Winter 2017

CPSU-BANGHART-W17S8G6

4 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 6

All Time: 38