Introduction

Replace the face plate to restore the visual quality of your device.

Parts

No parts required.

  1. Remove each of the three screws located near the bottom of the screen using a  Phillips #00 screwdriver.
    • Remove each of the three screws located near the bottom of the screen using a Phillips #00 screwdriver.

  2. Remove each of the 4 screws located at the corners of the face plate.
    • Remove each of the 4 screws located at the corners of the face plate.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Carefully lift the entire perimeter of the face plate using a plastic spudger.
    • Carefully lift the entire perimeter of the face plate using a plastic spudger.

  5. Pull back the edge of the face plate to remove it.
    • Pull back the edge of the face plate to remove it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Courtney Clark

Member since: 01/12/2017

206 Reputation

2 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 89