Introduction

Replace the speakers to improve the sound quality of your device.

Image 1/1: Using a Phillips #00 Screwdriver, take out the following screws:
  • Power off the device before beginning disassembly.

  • Using a Phillips #00 Screwdriver, take out the following screws:

    • Two 6 mm screws

    • Three 4 mm screws

    • Four 3 mm screws

  • These screws can be taken out in any order.

Add Comment

Image 1/1:
  • Using a Phillips #00 Screwdriver, remove the screws located under the top two standoffs.

Add Comment

Image 1/1:
  • Remove the cover off the back of the device.

Add Comment

Image 1/1:
  • Two speakers can be found on the device, one in the lower-right corner and one in the lower left-corner.

Add Comment

Image 1/1:
  • Gently pull up on the speaker to remove it. Repeat this for the other speaker.

Add Comment

Image 1/2: Be careful while using a soldering iron as it is extremely hot. Image 2/2: Follow the [https://www.ifixit.com/Guide/How+To+Solder+and+Desolder+Connections/750|How To Solder and Desolder Connections]  guide for help.
  • De-solder the red and black wires to disconnect the old speaker.

  • Be careful while using a soldering iron as it is extremely hot.

  • Follow the How To Solder and Desolder Connections guide for help.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Alex Stokes

Member since: 01/12/2017

101 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 40