Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

When everything is working as it should, the speaker produces nearly the same vibrations that the microphone originally recorded and encoded on a tape, CD or LP record.

Parts

No parts specified.

  1. Using your Philips head screwdriver, remove the 10 outer black screws from the back of the device.
    • Using your Philips head screwdriver, remove the 10 outer black screws from the back of the device.

  2. Gently remove the back panel of the device being careful not to unplug any internal wires.
    • Gently remove the back panel of the device being careful not to unplug any internal wires.

  3. Using your Phillips head screwdriver, remove the 4 brass speaker screws.
    • Using your Phillips head screwdriver, remove the 4 brass speaker screws.

    • Be careful to not remove the speaker housing screws, which surround the speaker screws.

  4. Carefully pull the wires out of their connections from the back of the speaker.
    • Carefully pull the wires out of their connections from the back of the speaker.

    • Don't forget which wire goes with which connection!

MarkAnthony

Member since: 09/22/2013

610 Reputation

5 Guides authored

Team

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 10

All Time: 1,757