Crosley CR704 Speaker Replacement

You're viewing a previously published version of this guide. View latest version

Jan 28, 2014 - 03:02:20

Jan 25, 2016 - 01:05:24 Jan 28, 2014 - 03:02:20 Dec 16, 2013 - 05:41:20 Dec 16, 2013 - 05:41:17 Nov 21, 2013 - 12:31:38 Nov 20, 2013 - 02:37:49 Nov 20, 2013 - 02:30:46 Nov 20, 2013 - 02:27:55 Nov 20, 2013 - 02:12:14 Nov 20, 2013 - 02:02:11 Nov 20, 2013 - 08:44:13 Nov 20, 2013 - 08:42:46 Nov 20, 2013 - 08:40:42 Nov 20, 2013 - 08:39:13 Nov 20, 2013 - 08:37:36 Nov 20, 2013 - 08:36:22 Nov 20, 2013 - 08:34:43 Nov 20, 2013 - 08:32:28 Nov 17, 2013 - 05:23:54 Nov 17, 2013 - 05:23:32 Nov 13, 2013 - 03:38:48 Nov 13, 2013 - 03:37:40

Newer

Introduction

When everything is working as it should, the speaker produces nearly the same vibrations that the microphone originally recorded and encoded on a tape, CD or LP record.

What you need

Step 1 Speaker

Crosley CR704 Speaker Replacement, Speaker: step 1, image 1 of 1

Using your Philips head screwdriver, remove the 10 outer black screws from the back of the device.

Step 2

Gently remove the back panel of the device being careful not to unplug any internal wires.

Step 3

Using your Phillips head screwdriver, remove the 4 brass speaker screws.
Be careful to not remove the speaker housing screws, which surround the speaker screws.