Craig CMP801 Battery Replacement

Step 1 Back Cover



• Locate the opening line between the cover and the device. Then locate the groove near the charging port.
Step 2



• Use a metal spudger to separate the back cover from the front touch screen.
• To do this, place the metal spudger in between the groove near the charging port of the device to unlatch the first clip.
Step 3
• Continue to separate all of the clips around the device until the back cover comes off completely.
Step 4 Battery
• Locate the white plug next to the battery.
• Use your fingers to pull off white plug that connected to the battery.
• Be careful not to pull or break the wires on the bottom.
Step 5
• The battery should only be connected to the LCD by adhesive tape.
• Using force, carefully remove the battery while holding the LCD in place.

Author

with 2 other contributors

Duyen

Member since: 09/25/17

281 Reputation

2 Guides authored

Badges: 8

• 
• 
• 

+5 more badges

Team

University of North Texas, Team S2-G2, Thompson Fall 2017 Member of University of North Texas, Team S2-G2, Thompson Fall 2017

UNT-THOMPSON-F17S2G2

4 Members

5 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview