Corsair Void Pro RGB Earcup Replacement

You're viewing a previously published version of this guide. View latest version

Jul 30, 2019 - 12:42:52

Nov 01, 2023 - 01:15:49 Jul 30, 2019 - 12:42:52 Jun 25, 2019 - 10:44:34 Jun 25, 2019 - 10:44:30 Jun 25, 2019 - 10:44:21 Jun 25, 2019 - 10:43:58 Jun 25, 2019 - 10:43:37 Jun 04, 2019 - 09:35:57 May 30, 2019 - 07:40:18 May 30, 2019 - 09:47:38 May 30, 2019 - 09:47:11 May 30, 2019 - 09:46:40 May 30, 2019 - 09:46:23 May 30, 2019 - 09:43:33 May 30, 2019 - 09:35:50 May 30, 2019 - 09:32:20 May 30, 2019 - 09:31:49 May 30, 2019 - 09:31:45 May 30, 2019 - 09:30:02 May 30, 2019 - 09:25:58 May 23, 2019 - 10:15:51 May 23, 2019 - 10:15:38 May 19, 2019 - 04:35:03 May 19, 2019 - 04:27:25 May 19, 2019 - 04:26:56 May 19, 2019 - 04:26:39 May 19, 2019 - 04:20:00 May 19, 2019 - 04:19:13 May 19, 2019 - 04:18:43 May 16, 2019 - 12:21:55 May 16, 2019 - 12:15:24 May 16, 2019 - 12:13:35 May 16, 2019 - 09:58:33 May 16, 2019 - 09:58:21 May 16, 2019 - 09:54:51 May 16, 2019 - 09:54:47 May 16, 2019 - 09:53:32 May 16, 2019 - 09:50:31 May 16, 2019 - 09:46:42 May 16, 2019 - 09:45:20 May 16, 2019 - 09:38:22 May 16, 2019 - 09:37:55

Newer

Introduction

Overtime, earmuffs for headphones need to be replaced. Follow these simple steps to learn how to replace your earmuffs. If you plan to replace the earmuffs, a replacement can be found form the Corsair site. It is also important to know how to disassemble the earmuffs in order to do most replacements or repairs for the headphones.

What you need

Step 1 Earcup

Corsair Void Pro RGB Earcup Replacement, Earcup: step 1, image 1 of 1

Carefully remove earmuff from headphones by getting a grip under the earmuff cushion and peeling up over the lip that keeps it in place.

Step 2

Using the Phillips #0 screwdriver, unscrew the seven 6.4 mm screws holding the black speaker cover in place.
If you are disassembling the lefthand earfmuff, there will be eight 6.4 mm screws to remove.

Step 3

Remove and set aside the black panel, taking care to keep the wires attached.
The panel should lift up without much force. If the panel does not budge, carefully use the iFixit plastic opening tool to dislodge the piece.