This translation was generated by a machine and has not been reviewed by a person yet. Speak this language? Review it.
Corded Dexter Jigsaw 750 Watts Blade Holder Replacement
Céline Chemineau and one other contributor
Last updated on Sep 2, 2026
Views: 5.1K
View statistics:
- Past 24 Hours:
- 6
- Past 7 Days:
- 36
- Past 30 Days:
- 146
- All Time:
- 5,128
Comments: 2
2 guide comments.
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Introduction
Go to step 1 ↓This guide shows how to replace the blade holder of a 750 W Dexter corded jigsaw. Always unplug the saw from the mains before opening it.
-
-
-
With the help of a screwdriver, unscrew and open the device.
-
Use the lever to unlock the cover.
-
-
-
Take off the blade holder, then raise the slide located at the end of the holder.
-
-
-
-
Replace the clip in the same place. The curved side of the clip needs to go into the round side of the bracket.
-
Ask FixBot
Cancel: I did not complete this guide.
One other person completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›
Team
2 Guide Comments
Le support de lame de ma scie sauteuse dexter nc750js s'est cassée
Ou trouver ce support ?
Aucun revendeur ne semble avoir les pièces de rechange pour cette machine.
Ou, y a t'il une autre marque équivalente?
