Conair Infiniti Pro Model 259NP Back Panel Replacement

You're viewing a previously published version of this guide. View latest version

Jun 10, 2014 - 11:06:14

Jun 10, 2014 - 11:06:14 May 30, 2014 - 08:49:34 May 29, 2014 - 11:55:45 May 29, 2014 - 11:55:06 May 29, 2014 - 09:21:29 May 29, 2014 - 09:11:12 May 29, 2014 - 09:08:28 May 21, 2014 - 05:50:35 May 21, 2014 - 05:23:25 May 21, 2014 - 05:22:36 May 21, 2014 - 05:18:37 May 21, 2014 - 05:17:45 May 21, 2014 - 05:16:35 May 21, 2014 - 05:08:51 May 21, 2014 - 05:00:58 May 21, 2014 - 04:59:39

Newer

Introduction

In order to replace any internal parts, you first need to take off the back panel of the hair dryer. This guide will show you how to do that.

What you need

Step 1 Back Panel

Conair Infiniti Pro Model 259NP Back Panel Replacement, Back Panel: step 1, image 1 of 1

Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.
Hold the hair dryer by the handle so that the back panel faces up.

Step 2

Remove the two 15.875 mm Phillips #2 screws from the back panel.

Step 3

Conair Infiniti Pro Model 259NP Back Panel Replacement: step 3, image 3 of 3

Starting from where the cord attaches to the handle, pull apart the two plastic panels.
Continue separating the back panel, working along the seam.
With moderate force, completely remove the back panel from the hair dryer.