Conair Cord-Keeper 169XR Cool Down Button Replacement

You're viewing a previously published version of this guide. View latest version

Jul 31, 2014 - 02:21:25

Jul 31, 2014 - 02:21:25 Mar 21, 2014 - 06:03:37 Mar 21, 2014 - 06:03:07 Mar 21, 2014 - 06:03:05 Mar 05, 2014 - 10:25:55 Mar 05, 2014 - 10:25:30 Mar 02, 2014 - 02:25:06 Mar 02, 2014 - 02:24:56 Feb 01, 2014 - 04:23:04 Feb 01, 2014 - 04:23:04 Feb 01, 2014 - 04:11:41 Feb 01, 2014 - 04:10:41 Feb 01, 2014 - 03:45:45 Feb 01, 2014 - 03:45:31 Feb 01, 2014 - 03:44:21 Feb 01, 2014 - 03:43:59

Newer

Introduction

If when you hold down the cool down button and the air is still hot, the spring behind the button may be broken. Another possibility is that the other parts of the button inside the dryer that engage that setting may be broken.

What you need

Step 1 Handle Cover

Conair Cord-Keeper 169XR Cool Down Button Replacement, Handle Cover: step 1, image 1 of 2

Conair Cord-Keeper 169XR Cool Down Button Replacement, Handle Cover: step 1, image 2 of 2

Unscrew the two 18 mm long Phillips #2 screws on the side of the hair dryer.

Step 2

Be cautious of pieces that can possibly fall out when removing the face of the handle.
Once you have taken the screws out, take the top half of the handle off by lifting it off of the dryer.

Step 3 Cool Down Button

Conair Cord-Keeper 169XR Cool Down Button Replacement, Cool Down Button: step 3, image 1 of 2

Conair Cord-Keeper 169XR Cool Down Button Replacement, Cool Down Button: step 3, image 2 of 2

Take out the cool down button and the spring behind it by gently lifting the button up toward you and pushing it to the right out of its groove.
You may need to replace the button and spring depending on which one is broken.