Introduction

You will need to assemble the proper tools shown in the first step of this guide before you continue forward.

This guide is meant to assist the reader with the proper steps to remove and replace the floppy drive of the Compaq Evo N1000v device.

Parts

No parts required.

Image 1/1:
  • Remove the 6 screws as shown in the photo.

Add Comment

Image 1/1:
  • Push the front of the laptop upwards as the photo shows.

Add Comment

Image 1/1:
  • Rest the front end piece on the keyboard area.

Add Comment

Image 1/1:
  • Squeeze and pull up on the left and right sides of the floppy drive cable to unlock it.

Add Comment

Image 1/1:
  • Use the tweezers is gently pull the cable from the locking mechanism.

Add Comment

Image 1/1:
  • Unscrew the 4 screws as shown in the photo.

Add Comment

Image 1/1:
  • Remove the floppy drive.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

ryan

Member since: 03/12/2014

470 Reputation

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 163