What you need
-
-
Shutdown your phone.
-
Remove the back cover of the phone
-
Unscrew all the screws identified in red in the picture.
-
Remove the plastic covers using your fingernails or a plastic tool.
-
-
-
-
Carefully peel off the 3 metal stickers (connectors) identified in white on the photo with a flat screwdriver.
-
Cut pieces of a sheet of cardboard or a sheet thick enough to the size of the stickers.
-
Glue a piece of cardboard or thick paper under each sticker to create extra thickness.
-
Replace the stickers in their original location (they will no longer stick to the shell, but that's okay).
-
To reassemble your device, follow the instructions in reverse order.
To reassemble your device, follow the instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›
