Introduction

This outer cover is the main cover that protects the inner electrical components. Perform the guide on a flat non-conductive surface to avoid electrical shock and damage to your device.

Parts

No parts required.

Turn the power switch, the leftmost knob, counterclockwise to off. Turn the power switch, the leftmost knob, counterclockwise to off.
  • Turn the power switch, the leftmost knob, counterclockwise to off.

Add Comment

Turn the device around and firmly pull the power cable plug to remove it from the radio. Turn the device around and firmly pull the power cable plug to remove it from the radio.
  • Turn the device around and firmly pull the power cable plug to remove it from the radio.

Add Comment

Unscrew the securing cap counterclockwise from the antenna connector. Unscrew the securing cap counterclockwise from the antenna connector.
  • Unscrew the securing cap counterclockwise from the antenna connector.

Add Comment

Gently pull the antenna cable to remove it from the back of the radio. Gently pull the antenna cable to remove it from the back of the radio.
  • Gently pull the antenna cable to remove it from the back of the radio.

Add Comment

Black Friday
Broken doesn't stand a chance.
Unscrew the cap counterclockwise on the microphone plug to disconnect the cable. Unscrew the cap counterclockwise on the microphone plug to disconnect the cable.
  • Unscrew the cap counterclockwise on the microphone plug to disconnect the cable.

Add Comment

Gently unplug the microphone plug.
  • Gently unplug the microphone plug.

Add Comment

Unscrew the top four 6.0mm Phillips head screws counterclockwise on the left and right side of the device using a #1 Phillips head screwdriver. Unscrew the top four 6.0mm Phillips head screws counterclockwise on the left and right side of the device using a #1 Phillips head screwdriver.
  • Unscrew the top four 6.0mm Phillips head screws counterclockwise on the left and right side of the device using a #1 Phillips head screwdriver.

Add Comment

Gently life and remove the top cover. Gently life and remove the top cover. Gently life and remove the top cover.
  • Gently life and remove the top cover.

Add Comment

Gently set down on a hard, flat, non-conductive surface to minimize risk of shock or breaking your radio. Carefully flip the radio over. Carefully flip the radio over.
  • Gently set down on a hard, flat, non-conductive surface to minimize risk of shock or breaking your radio.

  • Carefully flip the radio over.

Add Comment

Unscrew the four 6.0mm Phillips head screws counterclockwise on the left and right side of the device that connect the remaining cover, using a #1 Phillips head screwdriver. Unscrew the four 6.0mm Phillips head screws counterclockwise on the left and right side of the device that connect the remaining cover, using a #1 Phillips head screwdriver.
  • Unscrew the four 6.0mm Phillips head screws counterclockwise on the left and right side of the device that connect the remaining cover, using a #1 Phillips head screwdriver.

Add Comment

Watch out for the wires connected to the speaker. These short wires will not allow you to move the cover very far. Gently lift and remove the case cover. Gently lift and remove the case cover.
  • Watch out for the wires connected to the speaker. These short wires will not allow you to move the cover very far.

  • Gently lift and remove the case cover.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Chase

Member since: 10/20/2013

258 Reputation

2 Guides authored

Team

Cal Poly, Team 11-37, Amido Fall 2013 Member of Cal Poly, Team 11-37, Amido Fall 2013

CPSU-AMIDO-F13S11G37

4 Members

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 14

All Time: 979