Introduction

This guide leads you through the process of opening up the LabelManager and cleaning the cutting blade. Keep in mind that the device has loose parts. Be careful and keep track of all parts.

  1. Start by placing your device on its face.
    • Start by placing your device on its face.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. Open the label cartridge compartment and remove any current label cartridge to reveal your label cutting blade. Open the label cartridge compartment and remove any current label cartridge to reveal your label cutting blade.
    • Open the label cartridge compartment and remove any current label cartridge to reveal your label cutting blade.

  4. Press down on the exterior button to protrude the blade outward. Once the blade is exposed simply use a microfiber cloth or cotton swab to clean off the blade. Be sure to use rubber cleaning gloves for added safety.
    • Press down on the exterior button to protrude the blade outward. Once the blade is exposed simply use a microfiber cloth or cotton swab to clean off the blade. Be sure to use rubber cleaning gloves for added safety.

    • Be careful, the blade is sharp!

Finish Line

One Comment

Group 9: Looks good. Great use of the hazard marker for the sharp blade.

Zachary Parker - Reply

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 216