Citizen Promaster Dive Automatic Strap Replacement
Ismael Vega and 3 other contributors
Last updated on Feb 1, 2024
Views: 3.4K
View statistics:
- Past 24 Hours:
- 12
- Past 7 Days:
- 52
- Past 30 Days:
- 255
- All Time:
- 3,443
Comments: 1
1 guide comment.
Go to guide commentsCompleted: 1 2
1 person has marked this guide "completed." Will you be next?
2 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓When you own a watch for an extended amount of time there is going to be wear on the strap. Instead of buying a new watch you can simply replace the strap.
What you need
Tools
-
-
-
Flip your watch to the back.
-
Insert the small end with the bar between the fork. Press outwards; when you feel the pressure, pull up slowly.
Ask FixBot
-
-
-
When the bar pops out, pull the strap out.
-
Remove the bar from the strap and place the spring bar in the new strap.
-
-
-
Replace the other strap by following the same instructions.
Cancel: I did not complete this guide.
One other person completed this guide.
1 Guide Comment
After the automatic watch fell to the ground, the back glass was broken and it stopped working
