Casio MH-10M Battery Replacement

Step 1 BATTERY

• This is the calculator in question.
• Features a black and white dot matrix screen.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2



• Turn the calculator over.
• Locate the six screws on the rear of the device.
• These are Philips #00 screws.
• Keep the screws you remove in a safe place so they don't get lost.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• Once the screws are removed, carefully lift the back panel off, lifting the top end first.
• Place the panel to one side.
• You can now see the battery.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4
• Remove the battery
• Lift it up from the right hand side to avoid damaging the spring.
• You may find this easier to do by prying it out with the screwdriver.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 5
• Now you can insert the new battery
• Ensure you place it in spring-first.
• Congratulations! You have replaced the battery.
• When reassembling, take care not to trap the red or black wires in the screws as this would sever them, making the calculator unusable.
• Once reassembled, the calculator will be turned on. Turn it off to save battery by pressing Shift --> AC.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Author

with 3 other contributors

Sam

Member since: 09/23/12

959 Reputation

1 Guide authored

Badges: 11

• 
• 
• 

+8 more badges

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview