Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

The E-125 uses a button cell backup battery in addition to the main battery. If left uncharged for an extended period, the backup battery will be exhausted, and all data may be lost.

This guide shows you how to replace this battery.

Parts

No parts specified.

  1. Flip the device over to the back side.
    • Flip the device over to the back side.

  2. Flip the switch to "BACK UP".
    • Flip the switch to "BACK UP".

  3. Remove the battery cover by pulling bottom section upwards as shown.
    • Remove the battery cover by pulling bottom section upwards as shown.

    • Insert a Spudger underneath the battery and pry upward to remove it.

Conclusion

Insert the replacement battery and follow this guide's steps in reverse to reassemble.

One other person completed this guide.

Ryan Fernandez

Member since: 04/03/2012

47 Reputation

5 Guides authored

Team

Cal Poly, Team 5-4, Forte Spring 2012 Member of Cal Poly, Team 5-4, Forte Spring 2012

CPSU-FORTE-S12S5G4

6 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 780